Αρχική Σελίδα
Προϊόντα
Σχετικά με εμάς
Γύρος εργοστασίων
Ποιοτικός έλεγχος
επαφή
Ζητήστε ένα απόσπασμα
Αρχική Σελίδα ΠροϊόνταΦραγμός χάλυβα εργαλείων

AISI H11 / DIN EN X37CrMoV5-1 1.2343 Tool Steel Bar / Rod Dia 20-1000 mm

AISI H11 / DIN EN X37CrMoV5-1 1.2343 Tool Steel Bar / Rod Dia 20-1000 mm

Κίνα AISI H11 / DIN EN X37CrMoV5-1 1.2343 Tool Steel Bar / Rod Dia 20-1000 mm προμηθευτής
AISI H11 / DIN EN X37CrMoV5-1 1.2343 Tool Steel Bar / Rod Dia 20-1000 mm προμηθευτής AISI H11 / DIN EN X37CrMoV5-1 1.2343 Tool Steel Bar / Rod Dia 20-1000 mm προμηθευτής

Μεγάλες Εικόνας :  AISI H11 / DIN EN X37CrMoV5-1 1.2343 Tool Steel Bar / Rod Dia 20-1000 mm

Λεπτομέρειες:

Τόπος καταγωγής: Ηπειρωτική Κίνα
Μάρκα: UST
Πιστοποίηση: ISO 9001:2008
Αριθμό μοντέλου: ASTM H11

Πληρωμής & Αποστολής Όροι:

Ποσότητα παραγγελίας min: 3 μετρικοί τόνοι
Τιμή: USD 1200-3000 / Metric Ton
Συσκευασία λεπτομέρειες: Στην τυποποιημένη συσκευασία εξαγωγής και το πλόιμο υλικό με την ορθογώνια δέσμη μορφής, που καλύπτε
Χρόνος παράδοσης: 15-35 ημέρες
Όροι πληρωμής: L/C, T/T, D/A, D/P
Δυνατότητα προσφοράς: 1000 μετρικοί τόνοι το μήνα
Contact Now
Λεπτομερής Περιγραφή Προϊόντος
Υλικό: εργαλείο χάλυβα Πρότυπο: ΜΒ, ASTM, DIN, JIS
Βαθμός: H11 / 1.2343 Διάμετρος: 201000mm
Μήκος: Κάτω από 16 μέτρα Σχήμα: στρογγυλός φραγμός
Τεχνικές: Τραβηγμένος στο κρύο Καυτός - κυλημένος Ελασματοποιημένος εν ψυχρώ Σφυρηλατημένος Επιφάνεια: Μαύρος, φωτεινός, γυαλισμένος, ξεφλουδισμένος, ή κατόπιν αιτήματος
Υπερηχητική δοκιμή: 100% UT που περνούν Επεξεργασία: Ανοπτημένος ή αποσβημένος και μετριασμένος παρεχόμενος
Τέλος: Λοξευμένο, σαφές τέλος όπως απαιτείται Ποιοτική επιθεώρηση: SGS, BV κ.λπ.
Υπηρεσία: Η τέμνουσα υπηρεσία και η 3$η επιθεώρηση κομμάτων παρέχονται

INTRODUCTION

 

AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.

 

If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and temper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.

 

 

APPLICATIONS

 

H11 alloy steel is often used for highly stressed structural parts such as aircraft landing gear.

 

Some typical applications: Hot punches, die casting dies, forging dies, hot shear blades, hot gripper dies, and extrusion tooling.

 

The tools produced from H11 chromium hot-work steels can be cooled using water without damage as these steels have low carbon and alloy contents.

Steel Grade 1.2343 / H11 Application Tool steel, Mold Steel
Shape Round Bar Standard GB, ASTM, DIN,JIS
Dimension Φ20-1000 mm; length below 16m Surface Black, Bright, Polished, Peeled
Technique Cold drawn; Hot rolled; Forged Ultrasonic Test 100% UT Passed

 

DELIVERY CONDITIONS

 

  Diameter (mm)
Cold drawn 10-100
Peeled 30-160
Grinded 10-600
Turned 130-1600
Hot Rolled 20-280
Hot Forged 130-1000

 

-EAF+(ESR) or EAF+LF+VD+(ESR)

-HOT rolled; Cold rolled; Forged; Cold Drawn

-Heat Treatment: Untreated, Annealing, N+T, Q+T

-Smelting: EAF+LF+VD (+ESR)

-Surface Finish: Black, Rough Machined, Peeled, Turned or as per given requirements

-UT 100% passed

-Cutting service provided

-Third Party inspection is acceptable (SGS, BV etc.)

 

EQUIVALENT GRADES

 

AISI/SAE DIN JIS GB
H11/T20811 1.2343 SKD6 4Cr5MoSiV

 

CHEMICAL COMPOSITION (%)

 

C Si Mn P S Cr Mo V

0.33

0.43

0.80

1.25

0.20

0.60

0.030

0.030

4.75

5.50

1.10

1.60

0.30

0.60

 

MECHANICAL PROPERTIES

Properties Metric Imperial
Hardness, Rockwell C (air cooled from 982°C, 45 mins) 52.5 52.5
Hardness, Rockwell C (air cooled from 1010°C, 45 mins) 56 56
Hardness, Rockwell C (air cooled from 1038°C, 45 mins) 57 57
Modulus of elasticity 207 GPa 30000 ksi
Modulus of elasticity (@538°C/1000°F) 159 GPa 23000 ksi
Modulus of elasticity (@204°C/400°F) 190 GPa 27500 ksi
Charpy impact (V-notch; air cooled from 1010°C;535°C temper temperature) 13.6 J 10.0 ft-lb
Charpy impact (V-notch; air cooled from 1010°C;650°C temper temperature) 27.1 J 20.0 ft-lb
Charpy impact (V-notch; air cooled from 1010°C;370°C temper temperature) 33.9 J 25.0 ft-lb
Machinability (1% carbon steel) 75.0 – 80.0% 75.0 – 80.0%
Poisson’s ratio 0.27-0.30 0.27-0.30
 

 

PROCESSING

 

Forging of AISI H11 Tool Steel

 

AISI H11 alloy steels are forged at 1121°C (2050°F). For this type of steels, forging below 899°C (1650°F) is not preferable.

 

 

AISI H11 Tool Steel Heat Treatment

 

Annealing of H-11 steel

Anneal at 871°C and slow cool at 4.4°C per hour or less in the furnace.

 

Tempering of Steel H11

Temper at 537°C to 648°C for Rockwell C hardness of 54 to 38. Double tempering for one hour each time at the selected tempering temperature is recommended.

 

AISI H11 / DIN EN X37CrMoV5-1 1.2343 Tool Steel Bar / Rod Dia 20-1000 mm

 

What we can offer?

-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.

-Machining and heat treatment are available.

-Also, we advise you in choosing the right materials.

 

Shape Available

  • Solid round bar
  • Flat bar
  • Square bar
  • Hexagon bar
  • Block
  • Plate
  • Sheet
  • Wire rod
  • Strip

 

Our Advantages

  • High mechanical property and quenching, enable the surface share equal hardness after deal with it
  • Good polishing and low roughness
  • Making the heat-treatment to harden condition before using it
  • Competitive price
  • Fast production lead-time
  • All the material are inspected with 3 times to meet the highly standards
  • Pure steel quality & stable quality to be guarantee
 

OUR MAIN PRODUCTS ARE LISTED AS BELOW

 

AISI H11 / DIN EN X37CrMoV5-1 1.2343 Tool Steel Bar / Rod Dia 20-1000 mm

 

Notes:

Available Size:
-Round: Dia. 20-1000 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm

 

PAYMENT AND SHIPPING

 

1. Both T/T and L/C will be acceptable

2. Trade Terms: FOB, CIF, CFR

3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties

4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples

 

COMPANY INFORMATION

 

Shanghai Unite Steel Trading Co., Ltd

We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.

In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.

What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!

 

FAQ

 

Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.

Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.

Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.

Q: What is the payment term?
A: T/T or L/C.

Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.

 

CONTACT US

 

We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.

 

Your Contact Person

Ms Chilli Ho

Phone/Wechat/Whatsapp +86-181-0187-5575

Skype: chilli.ho@outlook.com

Email: chilli.ho@shunitesteel.com

Στοιχεία επικοινωνίας
SHANGHAI UNITE STEEL TRADING CO., LTD

Υπεύθυνος Επικοινωνίας: Chilli.ho

Τηλ.:: +8618101875575

Στείλετε το ερώτημά σας απευθείας σε εμάς (0 / 3000)