Αρχική Σελίδα
Προϊόντα
Σχετικά με εμάς
Γύρος εργοστασίων
Ποιοτικός έλεγχος
επαφή
Ζητήστε ένα απόσπασμα
καλής ποιότητας Τραβηγμένος στο κρύο σωλήνας χάλυβα για τις πωλήσεις
καλής ποιότητας Τραβηγμένος στο κρύο σωλήνας χάλυβα για τις πωλήσεις
Είμαι Online Chat Now

ASTM 1035 DIN CK35 JIS S35C Carbon Steel Bar / Rod

Κίνα ASTM 1035 DIN CK35 JIS S35C Carbon Steel Bar / Rod προμηθευτής
ASTM 1035 DIN CK35 JIS S35C Carbon Steel Bar / Rod προμηθευτής ASTM 1035 DIN CK35 JIS S35C Carbon Steel Bar / Rod προμηθευτής

Μεγάλες Εικόνας :  ASTM 1035 DIN CK35 JIS S35C Carbon Steel Bar / Rod

Λεπτομέρειες:

Τόπος καταγωγής: Ηπειρωτική Κίνα
Μάρκα: UST
Πιστοποίηση: ISO 9001:2008
Αριθμό μοντέλου: ASTM 1035

Πληρωμής & Αποστολής Όροι:

Ποσότητα παραγγελίας min: 3 μετρικοί τόνοι
Τιμή: USD 700-1500 / Metric Ton
Συσκευασία λεπτομέρειες: Στην τυποποιημένη συσκευασία εξαγωγής και το πλόιμο υλικό με την ορθογώνια δέσμη μορφής, που καλύπτε
Χρόνος παράδοσης: 15-35 ημέρες
Όροι πληρωμής: L/C, T/T, D/A, D/P
Δυνατότητα προσφοράς: 1000 μετρικοί τόνοι το μήνα
Contact Now
Λεπτομερής Περιγραφή Προϊόντος
Υλικό: κράμα χάλυβα Πρότυπο: ΜΒ, ASTM, DIN, JIS
Βαθμός: 1035 / S35C/CK35 Διάμετρος: 41600mm
Μήκος: Κάτω από 16 μέτρα Σχήμα: στρογγυλός φραγμός
Τεχνικές: Τραβηγμένος στο κρύο Καυτός - κυλημένος Ελασματοποιημένος εν ψυχρώ Σφυρηλατημένος Επιφάνεια: Μαύρος, φωτεινός, γυαλισμένος, ξεφλουδισμένος, ή κατόπιν αιτήματος
Υπερηχητική δοκιμή: 100% UT που περνούν Επεξεργασία: Ανοπτημένος ή αποσβημένος και μετριασμένος παρεχόμενος
Τέλος: Λοξευμένο, σαφές τέλος όπως απαιτείται Ποιοτική επιθεώρηση: SGS, BV κ.λπ.
Υπηρεσία: Η τέμνουσα υπηρεσία και η 3$η επιθεώρηση κομμάτων παρέχονται

INTRODUCTION

 

Carbon steels have carbon as the key alloying element in their composition. They also contain up to 0.4% silicon and 1.2% manganese. In addition, the residual elements such as copper, molybdenum, aluminium, chromium and nickel are present in these steels.

 

AISI 1035 is a water resisting carbon steel whose wear resistance and hardenability are increased by the addition of small quantity of chromium.

 

Applications of AISI 1035 Steel

 

This grade of steel is used for forged parts where the strength and toughness of the material are appropriate. C1035 may be used for the manufacture of links and couplings, gears, forged shafts and axles. It may also be used for the production, by open die forging, of such diverse parts as a 4,000 lb hub for a mining shovel. The following are the major applications of AISI 1035 carbon steel:

  • Levers
  • Bolts
  • Nuts
  • Studs

 

SUPPLY RANGE OF of AISI 1035
 

-Dimension: Diameter 4-1600 mm, any length below 16 meters

-Delivery Conditions:

Cold drawn: 4-100 mm

Peeled: 30-160 mm

Grinded: 4- 600 mm

Turned: 130-1200 mm

Hot rolled: 12-320 mm

Hot forged: 130-1600 mm

-EAF+(ESR) or EAF+LF+VD+(ESR)

-HOT rolled; Cold rolled; Forged; Cold Drawn

-Heat Treatment: Untreated, Annealing, N+T, Q+T

-Smelting: EAF+LF+VD (+ESR)

-Surface Finish: Black, Rough Machined, Peeled, Turned or upon request

-UT 100% passed

-Cutting service provided

-Third Party inspection is acceptable (SGS, BV etc.)

 

ASTM 1035 DIN CK35 JIS S35C Carbon Steel Bar / Rod

 

Standard

 

ASTM A213; ASTM A335; ASTM A519; ASTM A106; ASTM A29; JIS G3462; JIS G3458; JIS G3444; JIS G4053; DIN17175; DIN1629; DIN2391; GB/9948, GB/6479; GB/T8162; GB/T8163; GB/T 3077; EN 10297; EN 10084; EN 10083; ISO 683/11; IOS 683/10; IOS 683/1; etc.

 

 

Equivalent grades of steel AISI 1030

 

ASTM A29/M BS JIS China
GB
Inter
ISO
1035 060A35 S35C 35 C35E4

 

Chemical Requirements, Composition, %

 

Element ASTM A29
1035
EN 10083
C35 1.0501
JIS G4051
S35C
Carbon 0.32–0.38 0.32-0.39 0.32-0.38
Manganese 0.60–0.90 0.50-0.80 0.60-0.90
Phosphorus 0.040 max 0.045 max 0.030 max
Sulfur 0.050 max 0.045 max 0.035 max
Silicon 0.10 max 0.40 max 0.15-0.35

 

Mechanical properties

 

Standard Steel Grade Yield strength MPa (>=) Tensile strength MPa (>=)

Elongation %

(>=)

Reduction of area % (>=) Hardness Brinell
ASTM A29 1035 370 585 30 53 183

 

 

Quality Assurance

 

Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET

 
ASTM 1035 DIN CK35 JIS S35C Carbon Steel Bar / Rod

 

 

PROCESSING

 

FORGING


C1035 may be forged from 2200ºF (1205ºC) down to 1650ºF (900ºC.) The actual forging and finishing temperatures will depend on a number of factors, including overall reduction during forging and complexity of part being forged. Experience alone will determine near exact values for these two parameters.
Parts are air cooled after forging.

 

HEAT TREATMENT


ANNEALING
Full annealing of small C1035 forgings is carried out from 1550-1625ºF (840-890ºC) followed by furnace cooling at 50ºF (28ºC) per hour, to 1200ºF (650ºC) soaking and air cooling.

 

NORMALIZING
The normalizing temperature range for this grade is typically 1600-1650ºF (870-900ºC.)
Normalizing is followed by cooling in still air. When forgings are normalized before hardening and tempering or other heat treatment, the upper range of the normalizing temperature is used. When normalizing is the final treatment, the lower temperature range is used.

 

HARDENING
Hardening of this grade is carried out from an austenitizing temperature of 1525-1575ºF (830-860ºC) and oil or water quenching.

Flame and induction hardening may be carried out by heating quickly to the desired case depth and quenching in water or oil. This should be followed by a tempering treatment at 300-400ºF (150-200ºC) to reduce stresses in the case without affecting its hardness. A surface hardness of Rc 50 may be obtained by this treatment.

 

TEMPERING
Tempering after normal hardening and oil or water quenching is carried out at 750-1260 ºF (400-680ºC) to give the required mechanical properties as determined by practical experience.

 

MACHINABILITY
Machinability of C1035 is good providing the full annealing cycle described above is used, ensuring a coarse lamellar pearlite to coarse spheroidite microstructure.

 

WELDABILITY
This grade is readily welded with the correct procedure. Welding in the through-hardened or flame or induction-hardened conditions is not recommended.

 

ASTM 1035 DIN CK35 JIS S35C Carbon Steel Bar / Rod

 

What we can offer?

-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.

-Machining and heat treatment are available.

-Also, we advise you in choosing the right materials.

 

Shape Available

  • Solid round bar
  • Flat bar
  • Square bar
  • Hexagon bar
  • Block
  • Plate
  • Sheet
  • Wire rod
  • Strip

 

Our Advantages

  • High mechanical property and quenching, enable the surface share equal hardness after deal with it
  • Good polishing and low roughness
  • Making the heat-treatment to harden condition before using it
  • Competitive price
  • Fast production lead-time
  • All the material are inspected with 3 times to meet the highly standards
  • Pure steel quality & stable quality to be guarantee
 

OUR MAIN PRODUCTS ARE LISTED AS BELOW

 

ASTM 1035 DIN CK35 JIS S35C Carbon Steel Bar / Rod

 

Notes:

Available Size:
-Round: Dia. 4 -1600 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm

 

PAYMENT AND SHIPPING

 

1. Both T/T and L/C will be acceptable

2. Trade Terms: FOB, CIF, CFR

3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties

4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples

 

COMPANY INFORMATION

 

Shanghai Unite Steel Trading Co., Ltd

We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.

In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.

What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!

 

FAQ

 

Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.

Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.

Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.

Q: What is the payment term?
A: T/T or L/C.

Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.

 

CONTACT US

 

We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.

 

Your Contact Person

Ms Chilli Ho

Phone/Wechat/Whatsapp +86-181-0187-5575

Skype: chilli.ho@outlook.com

Email: chilli.ho@shunitesteel.com

Στοιχεία επικοινωνίας
SHANGHAI UNITE STEEL TRADING CO., LTD

Υπεύθυνος Επικοινωνίας: Chilli.ho

Τηλ.:: +8618101875575

Στείλετε το ερώτημά σας απευθείας σε εμάς (0 / 3000)